[Linuxcantabria] crear interfaz wlan
Pechitos McTetis
pechitos.mctetis en gmail.com
Jue Jun 15 14:20:10 CEST 2006
Ahí va!!
kleine:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
kleine:~# dmesg
100030 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (8190 buckets, 65520 max) - 212 bytes per conntrack
input: AT Translated Set 2 keyboard on isa0060/serio0
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost en snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID0 RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 MODM PS2K
ACPI: (supports S0 S3 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
kjournald starting. Commit interval 5 seconds
Adding 1084348k swap on /dev/sda7. Priority:-1 extents:1
EXT3 FS on sda6, internal journal
Real Time Clock Driver v1.12
Generic RTC Driver v1.07
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
acpi-cpufreq: CPU0 - ACPI performance management activated.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ub: sizeof ub_scsi_cmd 68 ub_dev 2384 ub_lun 140
usbcore: registered new driver ub
Bluetooth: Broadcom Blutonium firmware driver ver 1.0
usbcore: registered new driver bcm203x
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: BlueFRITZ! USB driver ver 1.1
usbcore: registered new driver bfusb
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Bluetooth: Digianswer Bluetooth USB driver ver 0.8
usbcore: registered new driver bpa10x
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Bluetooth: VHCI driver ver 1.1
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.2
wbsd: Copyright(c) Pierre Ossman
I2O subsystem v$Rev$
i2o: max drivers = 8
I2O Block Device OSM v$Rev$
block-osm: registered device at major 80
I2O Configuration OSM v$Rev$
I2O ProcFS OSM v$Rev$
I2O SCSI Peripheral OSM v$Rev$
irda_init()
NET: Registered protocol family 23
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Fan [FAN1] (off)
ACPI: Thermal Zone [TZCR] (65 C)
ACPI: Thermal Zone [TZVR] (55 C)
ACPI: Thermal Zone [TZVL] (55 C)
ACPI: Thermal Zone [TZCL] (51 C)
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
sk98lin: Network Device Driver v8.28.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8036 Fast Ethernet Controller
PrefPort:A RlmtMode:Check Link State
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211: 802.11 data/management/control stack, 1.1.6
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno en linux.intel.com>
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.8
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:06:04.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.4-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:06:04.0 failed with error -5
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
uhci_hcd 0000:00:1d.0: detected 2 ports
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.12 uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
uhci_hcd 0000:00:1d.1: detected 2 ports
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.12 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
uhci_hcd 0000:00:1d.2: detected 2 ports
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.12 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
usb 1-1: new low speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
uhci_hcd 0000:00:1d.3: detected 2 ports
usb usb4: default language 0x0409
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.12 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.3
usb usb4: hotplug
usb usb4: adding 4-0:1.0 (config #1, interface 0)
usb 4-0:1.0: hotplug
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: no power switching (usb 1.0)
hub 4-0:1.0: individual port over-current protection
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: local power source is good
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2
ordered !ppc ports=8
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: capability 0001 at 68
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8
period=1024 Reset HALT
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB-PS/2 Optical Mouse
usb 1-1: Manufacturer: Logitech
usb 1-1: hotplug
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
usb usb5: default language 0x0409
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.12 ehci_hcd
uhci_hcd 0000:00:1d.0: uhci_result_control: failed with status 440000
[f79b2240] link (379b21b2) element (37a05000)
0: [f7a05000] link (37a05040) e0 LS Stalled CRC/Timeo Length=7
MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=379f0fa0)
1: [f7a05040] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff
DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
usb 1-1: can't set config #1, error -71
usb 1-1: hotplug
usb usb5: SerialNumber: 0000:00:1d.7
usb usb5: hotplug
usb usb5: adding 5-0:1.0 (config #1, interface 0)
usb 5-0:1.0: hotplug
hub 5-0:1.0: usb_probe_interface
hub 5-0:1.0: usb_probe_interface - got id
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 5-0:1.0: standalone hub
hub 5-0:1.0: no power switching (usb 1.0)
hub 5-0:1.0: individual port over-current protection
hub 5-0:1.0: Single TT
hub 5-0:1.0: TT requires at most 8 FS bit times
hub 5-0:1.0: power on to power good time: 20ms
hub 5-0:1.0: local power source is good
hub 1-0:1.0: port_wait_reset: err = -107
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00
hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000
hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000
hub 5-0:1.0: state 5 ports 8 chg 0000 evt 0000
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
hub 5-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
hub 5-0:1.0: port_wait_reset: err = -107
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
hub 5-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 5-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:1d.7: port 4 full speed --> companion
ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT
hub 5-0:1.0: port_wait_reset: err = -107
hub 5-0:1.0: state 5 ports 8 chg 0000 evt 0000
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB-PS/2 Optical Mouse
usb 1-1: Manufacturer: Logitech
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-1
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004
uhci_hcd 0000:00:1d.1: port 2 portsc 0093,00
hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: skipped 1 descriptor after interface
usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2: hotplug
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: hotplug
hci_usb 2-2:1.0: usb_probe_interface
hci_usb 2-2:1.0: usb_probe_interface - got id
usb 2-2: adding 2-2:1.1 (config #1, interface 1)
usb 2-2:1.1: hotplug
usb 2-2: adding 2-2:1.2 (config #1, interface 2)
usb 2-2:1.2: hotplug
hci_usb 2-2:1.2: usb_probe_interface
hci_usb 2-2:1.2: usb_probe_interface - got id
uhci_hcd 0000:00:1d.2: suspend_hc
uhci_hcd 0000:00:1d.3: suspend_hc
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
ACPI: PCI Interrupt 0000:06:06.0[A] -> Link [LNKC] -> GSI 11 (level,
low) -> IRQ 11
Yenta: CardBus bridge found at 0000:06:06.0 [1179:ff10]
Yenta: ISA IRQ mask 0x00d8, PCI irq 11
Socket status: 30000006
floppy0: no floppy controllers found
kleine:~# lsmod
Module Size Used by
yenta_socket 20488 1
rsrc_nonstatic 9728 1 yenta_socket
ehci_hcd 45000 0
uhci_hcd 30476 0
ipw2200 185280 0
ieee80211 43560 1 ipw2200
ieee80211_crypt_wep 4096 0
ieee80211_crypt 4932 3 ipw2200,ieee80211,ieee80211_crypt_wep
usbhid 34016 0
sermouse 4928 0
uinput 7040 0
ieee1394 90804 0
video 14020 0
sk98lin 212568 1
evdev 7552 1
agpgart 29512 0
radeonfb 90432 0
i2c_algo_bit 8712 1 radeonfb
i2c_core 18128 2 radeonfb,i2c_algo_bit
cpufreq_userspace 3676 0
cpufreq_stats 3908 0
cpufreq_powersave 1472 0
cpufreq_ondemand 5212 0
cpufreq_conservative 6244 0
thermal 10760 0
fan 3268 0
button 4944 0
battery 7620 0
ac 3396 0
snd_pcm_oss 50208 0
snd_pcm 85128 1 snd_pcm_oss
snd_timer 21956 1 snd_pcm
snd_page_alloc 7684 1 snd_pcm
snd_mixer_oss 17728 1 snd_pcm_oss
snd 45860 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 7584 1 snd
lcd 3968 0
backlight 4096 0
usb_storage 30340 0
ohci_hcd 35332 0
usblp 11136 0
donauboe 14784 0
irda 195772 1 donauboe
crc_ccitt 1792 2 donauboe,irda
i2o_scsi 7104 0
i2o_proc 29908 0
i2o_config 9352 0
i2o_block 10636 0
i2o_core 36180 4 i2o_scsi,i2o_proc,i2o_config,i2o_block
wbsd 15304 0
mmc_block 6216 0
mmc_core 15172 2 wbsd,mmc_block
piix 9284 0 [permanent]
hci_vhci 5056 0
hci_usb 13128 0
hci_uart 15676 0
dtl1_cs 8964 0
btuart_cs 9028 0
bt3c_cs 10564 0
bpa10x 9540 0
bluecard_cs 9988 0
pcmcia 21448 6 dtl1_cs,btuart_cs,bt3c_cs,bluecard_cs
pcmcia_core 43784 7
yenta_socket,rsrc_nonstatic,dtl1_cs,btuart_cs,bt3c_cs,bluecard_cs,pcmcia
bfusb 10564 0
bluetooth 44036 9
hci_vhci,hci_usb,hci_uart,dtl1_cs,btuart_cs,bt3c_cs,bpa10x,bluecard_cs,bfusb
bcm203x 4804 0
ub 16988 0
usbcore 120444 12
ehci_hcd,uhci_hcd,usbhid,usb_storage,ohci_hcd,usblp,hci_usb,bpa10x,bfusb,bcm203x,ub
firmware_class 7872 4 ipw2200,bt3c_cs,bfusb,bcm203x
acpi_cpufreq 4868 1
freq_table 3588 2 cpufreq_stats,acpi_cpufreq
processor 18164 2 thermal,acpi_cpufreq
aes_i586 38272 0
psmouse 29380 0
rtc 10744 0
--
Linux Registred User #305598
Miembro del grupo lilo http://lilo.uah.es
Miembro del grupo linuca http://www.linuca.org
Clave pública GnuPG ID=1FC7B48B en el servidor: pgp.rediris.es
Más información sobre la lista de distribución Linuxcantabria